Pinball Medic Amusements
New Replacement Circuit Boards
Williams, Bally, Gottlieb and Data East
Solid State Pinball Power Supply, Solenoid Driver and
Flipper Button Circuit Boards
New Replacement Circuit Boards
Williams, Bally, Gottlieb and Data East
Solid State Pinball Power Supply, Solenoid Driver and
Flipper Button Circuit Boards
• All boards are reproductions of the original Pinball Printed Circuit Board Sets and are not manufactured by the game's OEM.
• They are direct 'drop-in' replacements and do not require game, board mounting or wiring harness modifications.
• All boards feature a new design using all modern components to eliminate the old original board 'engineering' flaws and connector corrosion without sacrificing compatibility with the original board sets.
• All new power supply boards include modern low drop out (LDO) regulator technology for superior voltage regulation and heat reduction.
• WPC & WPC-S Solenoid Driver and Power Supply board features in-rush current limiting, soft start power supplies and high current capacity MOSFET solenoid coil driver transistors.
• Pinball Medic Amusements is not responsible for shipping an incorrect system board if the wrong board was ordered.
We will try to double check to see if the correct board was ordered based on game title.
• Unless noted otherwise: Shipping will be $9 (using Priority three day ground service) for one Williams solenoid driver board or two small sized boards shipped to the same address in the U.S.A.
• Pinball Medic cannot ship a new replacement board until we get 10 prepaid orders for a particular board. Once this is accomplished, the boards will be shipped out to all that prepaid for them. This is a one time supplier's requirement and will not be repeated.
All boards on this page are temporarily out of stock.
Williams Pinball System 3,4,6 and 7 - 9
Power Supply BOARDS
Williams WPC-89 & WPC-S (Security PIC)
Power Supply and Solenoid Driver BOARD
Price $225 WPC89SPS
(Shipping - $9 per board shipped to the same address)
temporarily out of stock
Williams system 11 and Data East Power Supply BOARD
(Alphanumeric Display Pinball Games Only)
Williams part numbers D-8345-??? ???=Game Number
Original Data East part number 520-5000-00
Price $65 WDEPS11-A
temporarily out of stock
System 3-6=WPS36 System 7-9=WPS79
Both boards priced at $65
temporarily out of stock
These two power supply boards have different pin outs and connectors depending on the system board installed in the game and therefore have different Pinball Medic part numbers.Both boards priced at $65
temporarily out of stock
Williams WPC-89 & WPC-S (Security PIC)
Power Supply and Solenoid Driver BOARD
Price $225 WPC89SPS
(Shipping - $9 per board shipped to the same address)
temporarily out of stock
Williams system 11 and Data East Power Supply BOARD
(Alphanumeric Display Pinball Games Only)
Williams part numbers D-8345-??? ???=Game Number
Original Data East part number 520-5000-00
Price $65 WDEPS11-A
temporarily out of stock
Data East Pinball Power Supply BOARD
Replaces Data East board part numbers 520-5047-00 and 520-5047-01, and 520-5047-02
(Pinball Games with 128x32 or 128x16 Dot Matrix Displays (DMD display games only))
Price $65 DEDMDPS
temporarily out of stock
Gottlieb System 80
Power Supply BOARD
Gottlieb part number: B-19694
Price $65 GOTTPS80
temporarily out of stock
Gottlieb System 1
Power Supply BOARD
Price $65 GOTTPS1
temporarily out of stock
Bally / Williams Type 2 Flipper Button O.C. BOARD
Price $10 WB2FBB
(Shipping - dependent on number of WB2FFBB boards ordered)
temporarily out of stock
New Pinball Replacement Circuit Board Order FORMReplaces Data East board part numbers 520-5047-00 and 520-5047-01, and 520-5047-02
(Pinball Games with 128x32 or 128x16 Dot Matrix Displays (DMD display games only))
Price $65 DEDMDPS
temporarily out of stock
Gottlieb System 80
Power Supply BOARD
Gottlieb part number: B-19694
Price $65 GOTTPS80
temporarily out of stock
Gottlieb System 1
Power Supply BOARD
Price $65 GOTTPS1
temporarily out of stock
Bally / Williams Type 2 Flipper Button O.C. BOARD
Price $10 WB2FBB
(Shipping - dependent on number of WB2FFBB boards ordered)
temporarily out of stock
 Williams pinball system 3,4 & 6 power supply board |
 Williams pinball system 7 & 9 power supply board |
 Williams pinball system 6 power supply installed |
Note: A Williams system 7/9 type power supply board can not replace a system 3,4 or 6 pinball power supply board.
The two boards have the same basic power supply components, but have different connector wiring.
We are not responsible for shipping an incorrect system board if the wrong board was ordered.
We will try to double check to see if the correct board was ordered based on game title.
| Williams System Generation | Williams Pinball Game Titles | Board Part Number | Discounted Price Each Board |
| System 3,4,6 |
Algar, Alien Poker, Blackout, Contact, Disco Fever, Firepower, Flash, Gorgar, Hot Tip, Lucky Seven, Phoenix, Scorpion, Stellar Wars, Time Warp, Tri-Zone, World Cup | WPS36 | $65 |
| System 7 & 9 |
Barracora, Black Knight, Comet, Cosmic Gunfight, Defender, Firepower 2, Hyperball, Joust, Jungle Lord, Laser Cue,
Pharaoh, Solar Fire, Sorcerer, Space Shuttle, Star Light, Time Fantasy, Varkon, Warlock |
WPS79 | $65 |
Used on Williams and Data East Pinball Games with Alphanumeric Only
Williams part numbers D-8345-??? (where ??? is the game number)
Data East part number 520-5000-00
Board Part Number
WDEPS11-A $65 Each Board
| Williams System 11 games | Data East DMD games |
Alley Cats, Banzai Run, Big Guns, Cyclone, F-14 Tomcat, Fire!, Grand
Lizard, High Speed, Millionaire, Pinbot, Road Kings, Space Station, Swords of Fury |
ABC Monday Night Football, Back to the Future, Laser War, Phantom
of the Opera, Playboy 35th Anniversary, Robocop, Secret Service, The Simpsons, Time Machine, Torpedo Alley |
New Gottlieb System 80 Power Supply board
Gottlieb part number B-19694
Board Part Number GOTTPS80 Price $65
Note: Gottlieb System 80 power supplies all have design defects and will over heat and
stop working or provide too much voltage to the sensitive electronics over time. Replacing the original power supply is mandatory to keep these game functioning.Gottlieb part number B-19694
Board Part Number GOTTPS80 Price $65
| Gottlieb System 80 Pinball Games |
| Alien Star, Amazon Hunt, Black Hole, Caveman, Circus, Counterforce, Devil's Dare, El Dorado, Force II,
The Games, Going Nuts, Haunted House, Ice Fever, Jacks to Open, James Bond, Krull, Mars God of War, Panthera, Pink Panther, Punk, Q*bert's Quest, Rack Em Up, Ready Aim Fire, Rocky, Royal Flush Dix, Spiderman, Spirit, Star Race, Striker, Super Orbit, Timeline, Touchdown, Volcano |
Pinball Medic's Board Part Number GOTTPS1 Price $65
Gottlieb system 1 pinball games |
| Asteroid Annie, Buck Rodgers, Charlie's Angels, Cleopatra, Close Encounters, Count Down, Dragon,
Genie, Hulk, Joker Poker, Pinball Pool, Roller Disco, Sinbad, Solar Ride, Torch, Totem |
Data East Power Supply Board
Our part number DEDMDPS Price $65
Data East Power Supply board for
Dot Matrix Display Pinball Machines
Replaces Data East part numbers
520-5047-00 and 520-5047-01, and 520-5047-02
Test points have been added for all voltages generated on this board
The wired connector (four pin connector) at the top right corner of the original
power supply board (original part number 520-5047-02) has been replaced by an on-board
connector (center far right hand side) on this new replacement power supply board.
No game wiring harness modifications are required to use this new board inside a pinball game.
Our part number DEDMDPS Price $65
Data East Power Supply board for
Dot Matrix Display Pinball Machines
Replaces Data East part numbers
520-5047-00 and 520-5047-01, and 520-5047-02
Test points have been added for all voltages generated on this board
The wired connector (four pin connector) at the top right corner of the originalpower supply board (original part number 520-5047-02) has been replaced by an on-board
connector (center far right hand side) on this new replacement power supply board.
No game wiring harness modifications are required to use this new board inside a pinball game.
Data East DMD Pinball Games |
| Batman, Checkpoint, Guns N' Roses, Hook, Jurassic Park, Last Action Hero, Lethal Weapon 3, Rocky &
Bullwinkle, Star Trek, 25th Anniversary, Star Wars, Tales from the Crypt, Teenage Mutant Ninja Turtles, Tommy, WWF Royal Rumble |
Replaces: Williams Pinball Board Numbers:
A-12697-1, A-12697-2, A-12697-3 & A-12697-4
Pinball Medic's Part Number WPC89SPS
Price $225
Features:
Test points have been added for all voltages generated on this board
WPC & WPC-S Solenoid Driver and Power Supply board features in-rush current limiting, soft
start power supplies and high current capacity MOSFET solenoid coil driver transistors.
Note: The old original board is a major cause of game resets due to connector, voltage regulator obsolesce and capacitor age.
Shipping will be $9 up to two boards shipped to the same address.Shipping on more then two boards will depend on the number of boards ordered
| Williams system WPC & WPC-S Pinball Games |
| Addams Family, Addams Family Gold, Black Rose, Corvette, Creature Black Lagoon, Demolition Man, Dirty,
Harry, Dr. Who, Dracula, Fish Tales, Flintstones, Funhouse, Gilligan's Island, Harley Davidson, Hurricane, ,Indiana Jones, Indianapolis 500, Jackbot, Johnny Mnemonic, Judge Dredd, No Fear, Party Zone, Popeye, RoadShow, Star Trek Next Generation, Terminator 2, The Getaway, The Machine Bride Of Pinbot (BOP), The Shadow, Theater of Magic, Twilight Zone, WhiteWater, Who Dunnit, World Cup Soccer '94 |
Back to Pinball Boards Index
Board Part Number
WB2FBB Board Price $12
Bally & Williams (WPC) - Type 2 Flipper Button board
Type 2 boards are NOT interchangeable with the Type 1 boards.
Board Part Number
WB2FBB Board Price $12
Bally & Williams (WPC) - Type 2 Flipper Button board
Type 2 boards are NOT interchangeable with the Type 1 boards.
Late Model Pinballs with Type 2 Flipper Button Circuit Boards |
| Attack from Mars, Cactus Canyon, Championship Pub, Circus Voltaire, Congo, Corvette, Demolition Man,
Dirty Harry, Flintstones, Indiana Jones, Indianapolis 500, Jackbot, Johnny Mnemonic, Judge Dredd, Junkyard, Medieval Madness, Monster Bash, NBA Fastbreak, No Fear, No Good Gofers, Popeye, Roadshow, Safe Cracker, Scared Stiff, Shadow, Star Trek the Next Generation, Tales of the Arabian Nights, Theatre of Magic, Who Dunnit, World Cup Soccer '94 |
Type 1 Flipper Button Circuit board pinball games (These pinballs are NOT
compatible with the type 2 Flipper board) |
| Addams Family Gold (Note: Also, some regular Addams Family games.) Creature From the Black Lagoon, Doctor Who, Dracula, Fish Tales, Twilight Zone, Whitewater |
PLEASE USE OUR PINBALL REPLACEMENT BOARDS FORM TO ORDER ALL NEW BOARDS.
'Board Identification by Game' charts are available on the Pinball Board Identification page.
Also See: Pinball Game ROM Programming and Pinball Board Repair pages.
PINBALL MEDIC
SITE LINKS
SITE LINKS
